MITCH LEE is the co-founder and CEO of Arc, which builds electric power and propulsion systems for vessels spanning the recreation, commercial, and defense sectors.
In 1890, a factory ran on one main (often steam) engine. The engine turned a shaft that ran the length of the building. The shaft turned pulleys that powered the lathes and looms on the floor. The factory ran at full power whether one machine was working or one hundred.
No one would design a factory like this now, because there’s a much better alternative: electric power distribution.
Rail made the same move a generation later. A steam locomotive connected the engine to the wheels with rods and cranks that limited performance. In the 15 years after World War II, American railroads went from almost all steam-powered mechanical systems, to almost all diesel-powered electric ones. Today, every train in the world runs electric systems that distribute power from diesel generators or the grid to electric motors on each axle.
Marine is one of the last major industries that still delivers power through mechanical coupling. Ships carry 80 percent of world trade by volume, and the industry generates about $4 trillion a year. But outside the biggest warships and cruise ships, nearly everything on the water runs an engine that mechanically turns a propeller using gearboxes and shafts. In 30 years, running a ship via mechanical shaft will look as strange as running a factory off one looks today.
What electric means on a ship
Most people associate electric with batteries. The natural result is they think electric lacks the endurance to work on the water, where massive ships spend weeks or even months at sea. That’s the wrong mental model. In fact, some of the largest, most advanced vessels in the world already run electric systems. Cruise ships are diesel-electric, Zumwalt-class destroyers run integrated electric propulsion, and the Navy’s new Columbia-class submarines use electric drives.
On a vessel, an electric system decouples energy generation from energy consumption. It frees you to tap into any source of energy you want, whether nuclear, diesel, alternative fuels, batteries, or even solar.
The generated power is then sent to a system responsible for distributing it elsewhere. On large vessels today, that often resembles something you’d see on land: a giant, expensive, AC-based power plant. But as with land-based systems, better technology is now available in the form of DC-based systems.
The core of the system is a bus: a giant power strip that supplies onboard motors, winches, pumps, radar, and other systems. Batteries attached to the bus store spare energy and deliver it when a load spikes. That allows you to run your onboard generators at a consistent, optimal speed, which increases both efficiency and reliability.
Once you adopt an electric system, fuel becomes a design choice. A day boat can run on batteries alone and tap into existing charging infrastructure at ports and marinas. A tug can run as a plug-in hybrid for added redundancy and range extension. A long-range vessel can run diesel- or nuclear-electric.
The end result is that the engine no longer determines the vessel’s performance; the bus and the software that dispatch power do.
What software can control
Mechanical systems are very…mechanical. They’re analog. Electric systems are inherently digital and software-defined.
On an electric vessel, the motor, the generator, the battery, the winch, and more all take commands from software. A centralized, robust computer replaces distributed, finicky device controllers that operate as black boxes. Think of the difference between a traditional car full of black-box components and a Tesla with centralized control. The centralized control becomes an API to observe and control every aspect of vessel performance at millisecond latency. There’s a reason why every autonomous car on the road is electric.
An unmanned vessel also has no one aboard to bleed a fuel line or reset a breaker. It needs a powertrain that runs for months without a hand on it, with faults handled in software. Dozens of companies are building for the Navy’s unmanned programs, and all of them need hardware that can be controlled by software.
Maintaining our edge
The Center for Strategic and International Studies counts China at 53 percent of the world’s commercial ship tonnage in 2024 and the United States at 0.1 percent. One Chinese state shipbuilder delivered more tonnage that year than the entire American industry has built since 1945. We’ve lost the battle of tonnage to China, but there is still an opportunity for America to gain an edge.
The greatest enabler of performance is in the layer that makes and controls power. Tonnage measures how much steel a country can weld. It says little about what a fleet can do once it’s on the water.
The Zumwalt-class destroyer was the first American surface combatant built around an integrated power system. Its turbines generate 78 MW, roughly ten times what an Arleigh Burke-class destroyer powerplant generates. The program is remembered as a failure, and the class was cut from 32 ships to three. But the power system is the part that worked. Zumwalt sails with about half the crew of a Burke, and when the Navy needed a ship to carry hypersonic missiles, it picked Zumwalt. The next destroyer, DDG(X), stays electric.
This is particularly critical because the next generation of naval weapons runs on electricity. Lasers, electronic attack, radar, and drone swarms all draw substantial power. In September, the Chief of Naval Operations told the fleet that “electrical power is becoming combat power.” When the Navy set the requirements for its next round of medium unmanned vessels, it dropped speed and refueling requirements but maintained the need for powering two containerized payloads.
Closing the gap
Powertrains are complex. They are made up of many thousands of pieces that need to act as one system. They need to be capable of running uninterrupted for months and operating at voltages that can kill humans. Taming all of that complexity into a performant, safe, and reliable system is an incredibly hard engineering challenge — and one that America is well positioned to excel at on the global stage. China can and will make advances on this front, but America is the undisputed global leader in software and AI.
The 2026 defense bill bars the Navy from signing a construction contract for a medium unmanned vessel until its propulsion and electrical systems have run for 30 days straight with no maintenance. The Office of Naval Research notes that today’s unmanned power plants are borrowed from crewed ships and were never designed to run without a person aboard. We need new power systems, ones that are actually designed from the start for unmanned operations and the demanding payloads they power.
The Navy signed production agreements for 30 medium unmanned vessels in September and stood up a four-star command for autonomous warfare the next day. The demand is there. Now the layer underneath must catch up.
America built its last century on maritime supremacy, and modernizing is essential to remaining a global superpower. The Navy has described the fleet it wants: thousands of vessels with no crews, run by software, kept at sea for months. That fleet exists only if the thing below the deck can be run by software too. We need to cut the shaft.



